Kia Soul: Adjustment
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Adjustment
| Transaxle Control Module (TCM) Learning |
When shift shock is occurred or parts related with the transaxle are replaced,
TCM learning should be performed.
In the following case, TCM learning is required.
| • |
Transaxle assembly replacement
|
| • |
TCM replacement
|
| • |
TCM upgrading
|
| TCM learning procedure |
| 1. |
Automatic Transaxle Fluid (ATF) temperature: 40 ~ 100°C (104 ~
212°F)
|
| 2. |
Static learning
Repeat the below shift pattern four times or more with stepping
on the brake.
|
| 3. |
Driving learning
Drive the vehicle from a stop in D through all gears 1st, 2nd,
3rd, 4th, 5th and 6th gear while holding the throttle steady at the
specified Throttle Position Sensor (TPS) value (15~25%).
|
Circuit Diagram
...
Transaxle Control Module (TCM). Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensu ...
See also:
Drive Belt Inspection
Drive Belt Inspection
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
...
Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning directio ...
Components
1. Clutch pedal assembly
2. Ignition lock and clutch switch
3. Master cylinder
4. Clutch tube
5. Clutch release cylinder
...