Kia Soul: A Pillar Garnish Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: A Pillar Garnish Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / A Pillar Garnish Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
After loosening the mounting screw, remove the A pillar garnish (A) using a screw driver.
   
•
Replace the A pillar garnish with a new one.

2.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Fender Garnish Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    Front Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Limitations of the system
    FCA is an assistant system for a driver in a certain risky driving condition and it does not take every responsibility for all risks from driving condition. FCA monitors the driving situations thro ...

    Voice Recognition Volume
    Adjusts voice recognition volume. Select [Voice Recognition Vol.] Set volume of TUNE knob ...

    Photo Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will ri ...