Kia Soul: 90,000 miles or 72 months - Normal maintenance schedule - Scheduled maintenance service - Maintenance - Kia Soul 2009-2013 AM Owner ManualKia Soul: 90,000 miles or 72 months

First generation AM (2010–2013) / Kia Soul 2009-2013 AM Owner Manual / Maintenance / Scheduled maintenance service / Normal maintenance schedule / 90,000 miles or 72 months

❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped)
❑ Inspect cooling system *1
❑ Inspect drive belt *4 (First 60,000 miles or 72 months after every 15,000 miles or 24 months)
❑ Inspect drive shaft and boots
❑ Inspect fuel filter *2
❑ Inspect fuel line, hoses and connection
❑ Inspect fuel tank air filter *2
❑ Inspect vapor hose and fuel filler cap
❑ Inspect visually the following items
1) Battery condition
2) Brake fluid / clutch (if equipped) fluid
3) Brake lines, hoses and connections
4) Brake pedal and operation
5) Chassis/body nuts and bolts
6) Drum brake and linings (if equipped)
7) Disc brakes and pads (if equipped)
8) Exhaust pipe and muffler
9) Front suspension ball joints
10) Fuel tank, cap, lines and hoses
11) Lubricate all locks and hinges
12) Parking brakes
13) Steering operation and linkage
14) Suspension mounting bolts
❑ Replace air cleaner filter
❑ Replace climate control air filter (if equipped)
❑ Replace engine oil and filter (Every 7,500 miles or 12 months)
❑ Add fuel additive *6 (Every 7,500 miles or 12 months)
❑ Rotate tires - including tire pressure and tread wear (Every 7,500 miles or 12 months)

    75,000 miles or 60 months
    ❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...

    105,000 miles or 84 months
    ❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...

    See also:

    Brake Switch. Installation
    1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45° ...

    Instrument Cluster Installation
    1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the clu ...

    Ignition Coil Removal
    1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...