Kia Soul: 26 Brake Control Solenoid Valve(26/B_VFS). Inspection
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS). Inspection
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the solenoid valve connector (A).
|
3. |
Measure resistance between solenoid valve signal terminal and
ground terminal.
|
4. |
Check that the resistance is within the specification.
|
26 Brake Control Solenoid Valve(26/B_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...See also:
Spark Plug Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring t ...
Refrigerant label
The refrigerant label is located on the underside of the hood. ...